User Manual

78 PSR-SX600 Reference Manual

Registration Memory

As convenient as the Registration Memory buttons are, there may be times during a performance when you

want to quickly switch between settings. The convenient Registration Sequence function lets you call up the

eight setups in any order you specify, by simply using the TAB [E][F] buttons (in the Main display) or the

pedal as you play.

Determining the order of Registration Memory selection

1 If you intend to use a pedal or pedals to switch the Registration Memory number,

connect the optional pedals to the appropriate FOOT PEDAL jacks.

For instructions, refer to chapter 9 of the Owner’s Manual.

2 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the Registration

Bank Selection Display, then select the desired Bank to be programmed.

3 Call up the operation display.

[MENU] → TAB [E] Menu1 → Cursor buttons [][][E][F] Regist Sequence/Freeze → [ENTER] →

TAB [E] Registration Sequence

4 If you use a pedal, specify here how the pedal will work—to advance or to reverse

through the sequence.

Press the [8 ] (Pedal) button to call up the operation window. After making setups as described below,

press the [EXIT] button to close the window.

[5 ]/[6 ] (Prev.): Selects which pedal is used for reversing the Registration Sequence.

[7 ]/[8 ] (Next): Selects which pedal is used for advancing the Registration Sequence.

Note that the pedal settings here (other than Off) will take priority over the settings in the Foot Pedal

display (page 95). If you want to use the pedal for a function other than Registration Sequence, make sure

to set this to Off.

Calling Up Registration Memory Numbers in Order (Registration

Sequence)

Indicates the name of the currently

selected Registration Memory Bank.