User Manual

8 PSR-SX600 Reference Manual
1
Voices
3 Change the following settings as necessary.
NOTE To register the Scale Tune settings to Registration Memory, be sure to checkmark the Scale Tune item in the Registration Memory display called up via the
[MEMORY] button.
Adjusting the Pitch for the Parts
You can adjust the pitch-related parameters (such as Tuning, Octave, etc.) for each part.
1 Call up the operation display.
[MENU] → TAB [E] Menu1 → Cursor buttons [][][E][F] Voice Setting → [ENTER] → TAB [F]
Tune
2 Move the Cursor on the display by using the Cursor buttons [][][E][F], and use
the [3 ]–[8 ] buttons to edit parameters.
[2 ] Base Note Determines the base note for each scale. When the base note is changed, the pitch
of the keyboard is transposed, yet maintains the original pitch relationship
between the notes.
[3 ]/
[4 ]
Tune Select the desired note to be tuned by using the [3 ] buttons and tune it in
cents by using the [4 ] buttons.
NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)
[5 ]–
[8 ]
Part Select Determines whether the Scale Tune setting is applied to each part or not.
Tuning Determines the pitch of each keyboard part.
Octave Determines the range of the pitch change in octaves, over two octaves up or down for
each keyboard part. The value set here is added to the setting made via the UPPER
OCTAVE [-]/[+] buttons.
Portamento Time Portamento is a function that creates a smooth transition in pitch from the first note
played on the keyboard to the next. The Portamento Time determines the pitch transi-
tion time. Higher values result in a longer pitch change time. Setting this to “0” results
in no effect. This parameter is available when the selected keyboard part is set to
MONO (page 18).