User Manual

80 PSR-SX600 Reference Manual
7
Registration Memory
Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the
sequence (Sequence End) are included as part of the Registration Memory Bank file. To store your newly
programmed Registration Sequence, save the current Registration Memory Bank file.
1 Press the REGIST BANK [+] and [-] buttons simultaneously to call up the Registration
Bank Selection Display.
2 Press the [8 ] (File) button to save the Bank file.
For details, refer to “Basic Operations” in the Owner’s Manual.
Using the Registration Sequence
1 Select the desired Registration Bank.
2 At the upper left of the Main display, confirm the Registration Sequence.
3 Press the TAB [E] or [F] button, or press the Foot Pedal to select the first Registration
Memory number.
The currently selected Registration Memory number will be highlighted.
4 Use the TAB buttons or Foot Pedal during your keyboard performance.
To return to the status in which no Registration Memory number is selected, press the TAB [E] and [F]
buttons simultaneously while the Main display is called up.
NOTE The pedal can be used for Registration Sequence even when the Main display is not shown.
NOTE You can also assign other functions to the pedal. These include Punch In/Out Song Recording (page 61) and Functions in the Foot Pedal page (page 95).
If you assign multiple functions to the pedal, the priority is: Punch In/Out Song Recording → Registration Sequence → Functions assigned to Foot
Pedal.