User Manual

ManualsBrandsYamaha ManualsKeyboard InstrumentsPSR-SX600

100

PSR-SX600 Reference Manual 95

Connections

Contents

Assigning a Specific Function to Each Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

MIDI Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

• MIDI System Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

• MIDI Transmit Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

• MIDI Receive Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

• On Bass Note Settings for Style Playback via MIDI Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

• Chord Type Settings for Style Playback via MIDI Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Connecting with a Smart Device via Wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

• Infrastructure Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

• Access Point Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

The functions of the foot pedals connected to the FOOT PEDAL [1]/[2] jacks can be changed individually

from the default settings (sustain, etc.)—for example, letting you use the footswitch to start/stop Style

playback, or use the foot controller to produce pitch bends.

NOTE For information on how to connect a foot pedal or what kinds of pedals can be connected, refer to the Owner’s Manual, chapter 9.

1 Call up the operation display.

[MENU] → TAB [E] Menu1 → Cursor buttons [][][E][F] Controller → [ENTER] → TAB [E] Foot

Pedal

2 Use the Cursor buttons [][] to select one of the two foot pedals to which the

function is to be assigned.

On the display, the numbers 1 and 2 correspond to the FOOT PEDAL jacks [1] and [2] respectively.

3 Use the [1 ] buttons to select the function to be assigned to the pedal specified in

step 2.

For information on available functions, see pages 96–98.

NOTE You can also assign other functions to the pedal—Punch In/Out of Song (page 61) and Registration Sequence (page 78). If you assign multiple functions

to the pedal, the priority is: Punch In/Out of Song → Registration Sequence → Functions assigned here.

Assigning a Specific Function to Each Pedal