User Manual

PSR-SX600 Reference Manual 97
9
Connections
Glide Up When the pedal is pressed, the pitch changes, and then returns to normal pitch when the
pedal is released. You can turn this pedal function on or off for each keyboard part on
this display.
Up/Down: Determines whether the pitch change goes up (is raised) or down (is low-
ered).
Range: Determines the range of the pitch change, in semitones.
On Speed: Determines the speed of the pitch change when the pedal is pressed.
Off Speed: Determines the speed of the pitch change when the pedal is released.
Glide Down
Portamento The portamento effect (a smooth slide between notes) can be produced while the pedal
is pressed. Portamento is produced when notes are played legato style (i.e., a note is
played while the preceding note is still held). The portamento time can also be adjusted
from the Voice Set display (page 14). You can turn this pedal function on or off for each
keyboard part on this display.
NOTE This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices.
Pitch Bend Up* Allows you to bend the pitch of notes up or down by using the pedal. You can turn this
pedal function on or off for each keyboard part on this display.
Up/Down: Determines whether the pitch change goes up (is raised) or down (is low-
ered).
Range: Determines the range of the pitch change, in semitones.
Pitch Bend Down*
Modulation* Applies modulation effects, such as vibrato, to notes played on the keyboard. You can
turn this pedal function on or off for each keyboard part on this display.
Modulation Alt This is a slight variation on Modulation above, in which the effects (waveform) can be
alternately turned on/off by each press of the pedal/footswitch.
Pedal Control (Wah) Applies the wah effect to notes played on the keyboard when the [DSP] button is turned
on. You can turn this pedal function on or off for each keyboard part on this display.
This parameter is available only when an effect whose category is “Modulation” and
whose type is “Wah” is applied.
Organ Rotary Slow/Fast Switches the Rotary Speaker speed between “Slow” and “Fast.”
This parameter is available only when an effect which contains “Rotary” in its name is
applied.
Kbd Harmony/Arp On/Off Same as the [HARMONY/ARPEGGIO] button.
Arpeggio Hold While the pedal is pressed, Arpeggio playback continues even after you release the key-
board, and then Arpeggio stops when the pedal is released. Make sure that any one of
the Arpeggio type is selected and the [HARMONY/ARPEGGIO] button is turned on.
Live Control Reset Value Resets the values of all the assignable functions of Live Control.
Style Start/Stop Same as the STYLE CONTROL [START/STOP] button.
Synchro Start On/Off Same as the [SYNC START] button.
Synchro Stop On/Off Same as the [SYNC STOP] button.
Intro1–3 Same as the INTRO [I]–[III] buttons.
Main A–D Same as the MAIN VARIATION [A]–[D] buttons.
Fill Down Plays a fill-in, which is automatically followed by the previous Main section (that of the
button on the immediate left).
Fill Self Plays a fill-in.
Fill Break Plays a break.
Fill Up Plays a fill-in, followed by the next Main section (that of the button on the immediate
right).
Ending1–3 Same as the ENDING/rit. [I]–[III] buttons.
NEXT PAGE