User Manual

PSR-SX900/SX700 Reference Manual 113
10
Controller Function Settings
Voice Pitch Bend* Allows you to bend the pitch of notes up or down by using the pedal. You
can make the following settings at the bottom of this display.
Up/Down: Determines whether the pitch change goes up (is raised) or
down (is lowered).
Range: Determines the range of the pitch change, in semitones.
--
Modulation (+), (-)* Applies vibrato and other effects to notes played on the keyboard. --
Modulation (+), (-)
Alt
This is a slight variation on Modulation above, in which the effects (wave-
form) can be alternately turned on/off by each press of the pedal/foot-
switch.

Modulation Hold
On/Off
Same as the [MODULATION HOLD] button.  -
Initial Touch On/
Off
Turns the Initial Touch setting of each keyboard part on the Keyboard/Joy-
stick display on/off.
 -
Left Hold On/Off Same as the [LEFT HOLD] button.  -
Pedal Control
(Wah)
Applies a wah effect to notes played on the keyboard. You can turn this
function on or off for each keyboard part at the bottom of this display.
--
Organ Rotary Slow/
Fast
Switches the Rotary Speaker speed (page 50) between “Slow” and “Fast. 
Kbd Harmony/
Arpeggio On/Off
Same as the [HARMONY/ARPEGGIO] button.  -
Arpeggio Hold While the pedal is pressed (hold on), Arpeggio playback continues even
after you release the keyboard, and then Arpeggio stops when the pedal is
released (hold off). When this function is assigned to the button, each press
of the button alternately toggles between hold on and hold off.
Make sure that any one of the Arpeggio type is selected and the [HAR-
MONY/ARPEGGIO] button is turned on.
 -
Registration Registration
Memory
Same as the REGISTRATION MEMORY [MEMORY] button.  -
Registration
Memory1–8
Same as the REGISTRATION MEMORY [1]–[8] buttons.  -
Registration
Sequence +/-
Advances/reverses through the Registration Sequence. - -
Registration Bank
+/-
Same as the REGIST BANK [+]/[-] buttons.  -
Registration Freeze
On/Off
Same as [On]/[Off] on the Registration Freeze display (page 86).  -
Re
gistration
Sequence On/Off
Same as [On]/[Off] on the Registration Sequence display (page 87).  -
Live
Control
Live Control Assign Same as the LIVE CONTROL [ASSIGN] button.  -
Live Control Reset
Val ue
Same as [Reset Value] on the Live Control display (page 117). Resets the
values of all the assignable functions of Live Control.
 -
Chord
Looper
Chord Looper On/
Off (PSR-SX900)
Same as the CHORD LOOPER [ON/OFF] button.  -
Chord Looper Rec/
Stop (PSR-SX900)
Same as the CHORD LOOPER [REC/STOP] button.  -
Functions
Assignability
Category Function Description P A R
The effect can be applied only to specific Voices.
NOTE
If you want to use a pedal, set the “Pedal Control” on the Registration Sequence display
(page 87).
NOTE