User Manual

PSR-SX900/SX700 Reference Manual 87

Registration Memory

The Registration Sequence function conveniently lets you instantly change panel setups during a live performance—

letting you call up the eight setups in any order you specify, by simply using the ASSIGNABLE buttons or the pedal

as you play.

1 If you intend to use a pedal or pedals to switch the Registration Memory number, con-

nect the optional pedals to the appropriate ASSIGNABLE FOOT PEDAL jacks.

For instructions, refer to the Owner’s Manual.

2 Press the REGIST BANK [-] and [+] buttons simultaneously to call up the Registration

Bank Selection display.

3 Select the desired Registration Memory Bank to create a sequence.

4 Call up the Registration Sequence display via [MENU]  [Regist Sequence].

5 If you intend to use a pedal to switch the Registration Memory

number, specify here how the pedal will be used.

The pedal assigned to “Regist +” will be used for advancing through the sequence.

The pedal assigned to “Regist -” will be used for reversing through the sequence.

If you intend to use the ASSIGNABLE button to switch the Registration Memory

number, assign “Registration Sequence +” or “Registration Sequence -” in the dis-

play called up via [MENU]  [Assignable] (page 111).

6 Program a Sequence order in which the Registration Memory numbers are to be called

up.

Basically, press the desired Registration Memory number button on the panel, then touch [Insert] to enter the

selected number.

Calling Up Registration Memory Numbers in Order (Registration

Sequence)

Current Registration

Bank name

Indicates the Registration

Memory numbers, in the order

of the current Registration

Sequence.

You can also assign other functions to

the pedal—Voice Guide Controller

(page 131), Punch In/Out of Song

(page 71) and the function set in the

Assignable display (page 111). If you

assign multiple functions to the pedal,

the priority is: Voice Guide Controller

 Punch In/Out of Song  Registra-

tion Sequence  the function set in the

Assignable display.

NOTE

|<, <, >, >| Moves the cursor.

Replace Replaces the number of the cursor location with the currently selected Registration Memory

number.

If you want to move the cursor directly to an already entered number, touch the desired number.

NOTE