User's Manual

PSR-E463/PSR-EW410 Owner’s Manual
18
Quick Guide
Basic Operation and Display Items
Basic Operation
This instrument features four basic functions: Voice, Style, Song and Groove Creator. To use this instrument,
select a basic function first, and then make various settings.
Press briefly
to increase.
3 Start a function or play the keyboard. 2 Select an item or value.1 Select a basic function.
Rotate the dial clockwise to
increase the value of the
selected item, or counter-
clockwise to decrease it’s
value.
Dial
Increase
When selecting a Voice, Style,
Groove, Song, etc., you can use
these buttons to jump to the first
item in the next or previous cate-
gory.
These buttons can also be used
to select function items sequen-
tially after pressing the [FUNC-
TION] button.
CATEGORY [<<], [>>] buttons
Use these buttons to directly
enter the desired Style/
Voice number etc, or a
parameter value.
Example:
Selecting Voice 003,
Bright Piano.
Number buttons [0]–[9]
Press the [+/YES] button briefly to
increase the value by 1, or press
the [-/NO] button briefly to
decrease the value by 1. Press
and hold either button to continu-
ously increase or decrease the
value in the corresponding direc-
tion.
Pressing both buttons simultane-
ously lets you reset a parameter
to the default value.
[+/YES], [-/NO] buttons
Decrease
Press briefly
to decrease.
Jumps to
the first
item in the
previous
category.
Press number
buttons [0], [0], [3].
The “Press & Hold” Symbol
Buttons having this indication can be used to call up an alternate function when the relevant
button is pressed and held. Hold down this button until the function calls up.
Depending on the basic function selected in step 1, you can use
the different functions as printed on the panel. Song functions are
printed above the buttons, Groove Creator functions are printed fur-
ther above, and Style functions are printed below.
Jumps to
the first
item in the
next cate-
gory.
* In most procedures described throughout this manual,
the dial is used for selecting items or changing values.
Note however, that in most cases in which the dial can
be used to change values, the [+/YES] and [-/NO] but-
tons can also be used.
Quick Guide