User's Manual

Connecting to Other Devices
PSR-E463/PSR-EW410 Owner’s Manual
48
Quick Guide
Yo u can connect a stereo system to amplify the
instrument’s sound by using the OUTPUT [L/L+R]/
[R] jacks.
Yo u can use the instrument’s [MASTER VOLUME]
dial to adjust the volume of the sound output to the
external device.
Yo u can set whether the sound of this instrument is
always output from its built-in speaker or not.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up “SP Mute” (Function 063).
3
Use the dial to select the desired setting.
When Speaker Mute is set to “ON,” the Speaker
sound is off. You can only hear the instrument
sound via the headphones or an external device
connected to the [OUTPUT] jacks.
When Speaker Mute is set to “OFF,” the speaker
sound is always on as long as headphones are
not connected.
Using an External Stereo
System for Playback (OUTPUT
[L/L+R]/[R] jacks) (PSR-EW410)
• Use audio cables and adaptor plugs having no (zero) resis-
tance.
• Use only the [L/L+R] jack for connection with a monaural
device.
• To avoid possible damage, first turn on the power to the
instrument, then to the external device. When turning off
the power, first turn off the power to the external device,
then to the instrument. Since this instrument’s power may
automatically be turned off due to the Auto Power Off func-
tion (page 16), turn off the power to the external device, or
disable Auto Power Off when you do not intend to operate
the instrument.
• Do not route the output from the OUTPUT jacks to the
[AUX IN] jack. If you make this connection, the signal input
at the [AUX IN] jack is output from the [OUTPUT] jacks and
then back again, creating a feedback loop that could make
normal performance impossible, and may even damage
the equipment.
Phone plug
(standard)
Audio cable
Phone plug
(standard)
Input jack
Powered speaker
Audio signal
NOTE
NOTICE
Speaker Mute On/Off Setting
(PSR-EW410)
SP Mute
OFF
063