Operation Manual

27
BATTERY PACK AND CHARGING PROCEDURE
Reading the charging status
Battery
charger lamp
Battery capacity indicator lamps
Current
status
Details
(Rear carrier type) (Down tube type)
On
Lit power lamps indicate the
amount of charging completed. A
flashing power lamp indicates
current progress.
Charging
During charging, the
battery capacity indicator
lamps light up one by one.
(Example: Battery is approximately
50–75 % charged.)
Off
Charging
completed
When charging is
complete, the charging
lamp on the battery
charger and the battery
capacity indicator lamp on
the battery pack go off.
Off
Four lamps flash simultaneously.
Battery is in
standby mode.
* The battery
internal
temperature
is too high
or too low.
Charging will
automatically restart when
a temperature is reached
that allows charging. (See
“Appropriate charging
environments”.)
When possible, always
perform charging at the
optimal temperature of
15–25 °C.
Battery is in
fault mode.
There is a fault in the
charging system. See
“TROUBLESHOOTING.”