Operation Manual

You can check the estimate of how much capacity is left in the battery and to what extent it is

charged. The check can be performed using either the display unit’s residual battery capacity indi-

cator or the battery’s residual battery capacity indicator lamps.

TIP

• Even if the battery’s capacity reaches 0 (zero), you can still ride the bicycle as a regular bicycle.

• If you are using an old battery pack, the residual battery capacity indicator may suddenly display

very little power when you start moving. This is not a malfunction. Once riding stabilizes and the

load is reduced, the proper value is displayed.

Residual battery capacity indicator display and estimate of residual bat-

tery capacity for display unit

The residual battery capacity can be displayed as a numerical value on the LCD display.

Display of the residual battery

capacity for the LCD multi-function

drive controller

Display of the

residual

battery

capacity

Applicable situation

100–11 %

When you turn on the power of the

LCD multi-function drive controller and

ride continually after the battery is fully

charged, the segments for the residual

battery capacity indicator go out one

by one each time the residual battery

capacity is reduced by 10 %.

Slow flashing

10–1 %

There is very little residual battery

capacity left. Please charge the

battery soon.

Fast flashing

0 %

There is no more residual battery

capacity. Turn off the power for the

LCD multi-function drive controller and

charge the battery pack soon.

* Assist is stopped, but you can still

ride the bicycle as a regular bicycle.

CHECKING THE RESIDUAL BATTERY CAPACITY