Operation Manual

22
INSTRUMENT AND CONTROL FUNCTIONS
7
STOPWATCH
The stopwatch counts time in seconds up to a maximum
of 9 hours 59 minutes 59 seconds.
If this maximum is reached, it will automatically start over
from 0 (zero) and continue counting.
• TIME MEASUREMENT
Use the function select switch to start and stop time
measurement.
Press the function select switch for 2 seconds or longer
to “RESET” the measured time.
• RESET
When the function select switch is pressed, the meas-
ured time will be reset and the measuring display will
be shown.
Use the assist mode switches (up & down) to go to the
“EXIT” display.
• EXIT
When the function select switch is pressed, the display
will return to the main riding display.
Use the assist mode switches (up & down) to go to the
“RESET” display.
TIP
• It is possible to return to the main riding display without
interrupting time measurement.
• When the power is turned off, the measured time will
be reset.
[S---]
[S]
[S]
[S]
[
▲
]
[
▼
]
[
▲
][
▼
]
Repetition of measurement start/stop by [S]
To main riding
display
Reset of the measurement value