Operation Manual

28
INSTRUMENT AND CONTROL FUNCTIONS
7
USB
You can select the USB receptacle as a power supply re-
ceptacle or as a receptacle for communication over a
wired connection.
When “PWR SPLY” is selected, it can be used as a power
supply receptacle.
When “COMM” is selected, it can be used as a receptacle
for wired communication.
TIP
• Normally you should not select “COMM” because this
is a service mode used for wired communication by
dealers.
• When the power is turned off, the mode automatically
changes to “PWR SPLY”.
1. Select “PWR SPLY” or “COMM” by using the assist
mode switches (up & down).
2. When you press the function select switch at the de-
sired item display, the setting will be kept and the main
riding display will be shown.
USB receptacle
[S]
[
▲
]
[S]
[
▼
]
[
▲
][
▼
]
To main riding
display
Selection of
“PWR SPLY” or “COMM”