Operation Manual

50
TROUBLESHOOTING
Symptom Check Action
An assist mode lamp
lights up in red and
an error description is
indicated in the
function display.
Error displays
The speed sensor cannot detect a
correct signal.
Turn off the power to the display unit and
then turn it on again, select the assist
mode and then ride for short distance.
Also, make sure the magnet is mounted
correctly on the spokes of the wheels.
Pushing assist function
Symptom Check Action
The pushing assist
function turns off.
Is the tire locked for a
few seconds?
Release your finger from the pushing
assist switch for a moment, and after
making sure that the tires turn, push the
switch again.
Did you pedal while the
pushing assist function
was running?
Take your feet off the pedals, and remove
your finger from the pushing assist
switch for a moment, and then press it
again.