Operation Manual

64 - English English - 65
13
INSTRUMENT AND CONTROL FUNCTIONS
2 Power “On/Off”
Each time you press the power switch, the power switches
between “On” and “Off”.
When you turn on the power, all of the displays light up.
After that, the battery capacity indicator, speedometer, as-
sist power meter, the function display such as average bi-
cycle speed, and “STD” of assist mode indicator, and
clock are displayed.
TIP
• When you turn on the power, the assist mode is auto-
matically set to Standard mode.
• Keep your feet off the pedals when turning on the dis-
play unit. Also, do not start riding immediately after
turning on the display unit. Doing so could weaken the
assist power. (Weak assist power in either of these
cases is not a malfunction.) If you did either of the
above by accident, remove your feet from the pedals,
turn on the power again, and wait a moment (approxi-
mately two seconds) before starting to ride.
Power switch
14
INSTRUMENT AND CONTROL FUNCTIONS
2 Displaying and switching the assist mode
The assist mode indicator displays the selected assist mode.
• When you press the assist mode switch (up), the mode
changes from “Off” to “+Eco” to “Eco” to “Std”, or from
“Std” to “High”.
• When you press the assist mode switch (down), the
mode changes from “High” to “Std”, or from “Std” to
“Eco”, or “Eco” to “+Eco” or “+Eco” to “Off”.
TIP
• Further pressing of the assist mode switch will not cy-
cle the assist mode selections.
• In the Off mode, the assist mode and assist power me-
ter are not displayed.
2 Speedometer
The speedometer displays your bicycle speed (in kilome-
ter per hour or mile per hour). To select the km/mile, see
“Clock and km/mile settings”.
TIP
If your bicycle speed is less than 0.5 km/h or 0.3 MPH, the
speedometer displays “0.0 km/h or 0.0 MPH”.
Speedometer
Assist mode
switch (down)
Assist mode
switch (up)
Assist mode indicator
High
Assist
mode
Assist mode
indicator
Std
Eco
+Eco
Off Hide
Off mode