User Manual

Panel Operation — TUNING screen
29
PX10/PX8/PX5/PX3 Reference Manual
 EQ (6 Band PEQ)
(Advanced mode only)
Edits 6 Band PEQ parameters of the speaker processor.
q CHANNEL button
Shows the target channel of the EQ. Use the [A] / [B] keys to select the target channel.
When EQ settings are linked, it shows A+B.
Move the cursor to the button and then press the knob to link the EQ settings.
w ON/OFF
Turns the 6 Band PEQ on/off. When set to off, the EQ characteristics display is shown
only in outline.
e FLAT
Sets the gain parameter of all bands to 0 dB.
r Band 1 – 6
Selects a single Band for calling up the corresponding parameters. Press the knob on
the selected band to move the cursor to a parameter area.
t Parameter area
Displays parameters of each Band. Move the cursor to a parameter name, and press the
knob to edit the parameter value. Press the [ ] (back) key to return the cursor to the
parameter name. Press again to return the cursor to the Band.
 LEVEL (output level)
(Advanced mode only)
Sets the output level to balance the output levels of channels.
q LEVEL
Sets the output levels in 0.1 dB increments.
NOTE
The EQ link works independently from the channel link. The EQ link is available for any chan-
nel type.
D-Contour HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
w
e
r
t
Input processor Speaker processor
D-Contour HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
Channel
Input processor Speaker processor