User Manual
Table Of Contents
- Cover
- Contents
- Introduction
- Controls and functions
- Setup
- Panel Operation
- Reference
Panel Operation — Initializing the PX amplifier
38
PX10/PX8/PX5/PX3 Reference Manual
To initialize all the user data
1. Turn on while pressing the [A] key.
2. Rotate the main knob to select “ALL” and press the main knob.
To initialize all the user data and speaker preset
Turn on while pressing the [B] key and the [ ] (back) key simultaneously. Screens to
confirm the initialization do not appear.
NOTE
• User data are parameters set in the CONFIG WIZARD, AMP PRESET, TUNING, and UTILITY
screens. For parameters, refer to “Function list” (page 39).
• PIN code is also initialized.
NOTE
The operation log is not deleted.