Owner`s manual

Periodic maintenance and adjustment
50
2. Slowly lower the shroud to the original
position, and then hook the shroud latch-
es.
Left side cover
To remove the left side cover
Loosen the fasteners, and then remove the
left side cover.
To install the left side cover
Place the left side cover in the original posi-
tion, and then tighten the fasteners.
Right side cover
To remove the right side cover
Loosen the quick fastener screws, and then
remove the right side cover.
To install the right side cover
Place the right side cover in the original posi-
tion, and then tighten the quick fastener
screws.
Top cover (PZ50RT / PZ50GT /
PZ50MT)
To remove the top cover
Pull up on the rear of the top cover.
To install the top cover
Insert the projections on the front of the top
cover into the slots in the left and right upper
covers, and then fit the projections on the rear
of the top cover into the grommets.
Right upper cover (PZ50RT / PZ50GT /
PZ50MT)
To remove the right upper cover
1. Remove the top cover. (See the above
procedure.)
1. Projection on the end of the air filter case
cover
2. Slot in the air filter case
1. Fastener
2. Left side cover
1. Right side cover
2. Quick fastener screw
1. Top cover
U8GK13E0.book Page 50 Wednesday, March 11, 2009 10:54 AM