User Manual

Input and output patching

V5 Reference Manual

• GEQ RACK............................ GEQ1L(A)–GEQ8R(B)

• EFFECT RACK ...................... FX1L(A)–FX8R(B)

• PREMIUM RACK ................... PR1L(A)–PR8R(B)

2 Port select buttons

Assign the port that will be used as insert-out/insert-in for the currently-selected

channel.

NOTE

If a rack in which a GEQ, PEQ or Premium Rack is mounted is specified as the insert-out or

insert-in, the other patch point will automatically be assigned to the same rack. Also, insert mode

will automatically be switched on. Additionally, if you defeat the insert-out or insert-in of a rack in

which a GEQ, PEQ or Premium Rack is mounted, the other patch point will automatically be

defeated and at the same time insert mode will automatically be switched off.

3 CLOSE button

Closes the screen.

Directly outputting an INPUT channel

The signal of an INPUT channel can be output directly from an OUTPUT jack on the I/O

device, from the desired OMNI OUT jack, or from the output channel of a desired slot.

NOTE

If you install a digital I/O card in a slot and digitally connect an external device, you must

synchronize the word clock of the QL console and the external device (page 234).

STEP

1. Use the Bank Select keys in the Fader Bank section and the [SEL] keys on the top

panel to select the INPUT channel that you want to output directly.

2. Press the popup button in the DIRECT OUT field in the SELECTED CHANNEL VIEW

screen.

3. Press the DIRECT OUT PATCH button in the INSERT/DIRECT OUT window.

4. Select an output port.

5. Press the DIRECT OUT ON button.

SELECTED CHANNEL VIEW screen INSERT/DIRECT OUT window (1ch)