User Manual

Setup

V5 Reference Manual

251

Redundant connections

Two consoles are sharing 256-ch HA remote (maximum size)

Mounting an I/O device on the Dante audio network

Here’s how to select which of the multiple I/O devices on the Dante audio network will be

mounted so that they can be used. Up to 24 units can be mounted for one QL series console.

With V4.1 or later, the Shure AXT400, QLXD4, and ULXD4 wireless systems, which do not

feature Dante output, can now be controlled. These Shure devices can be connected to the

same physical network as Dante, mounted, and controlled.

However, the actual audio signals are physically connected to an R series I/O rack mounted

on the QL console or to OMNI IN. By associating the port where audio is input with the

mounted Shure device, control and monitoring are possible from the input channel that is

patched to the input port. For details about the explanation of how to control the Shure wireless

systems, which do not feature Dante output, refer to

on page 175, “PORT ASSIGN tab.”

DANTE SETUP window (DEVICE MOUNT page)

QLQL

5 hops = 0.5 ms

STEP

1. Press the DEVICE MOUNT tab in the lower part of the DANTE SETUP window.

2. Press the I/O device select button.

3. In the DEVICE SELECT window, press the setup method select button.

4. Use the [TOUCH AND TURN] knob to make settings.

5. When you have finished making settings, press the OK button to close the window.

1 2