User Manual

ManualsBrandsYamaha ManualsAudio MixerQL Series

111

112

113

114

115

116

117

118

119

120

Monitor and Cue functions

Reference Manual

111

 Meter field

ACTIVE CUE indicator

Lights to indicate the type of cue currently being monitored (input: blue, DCA: yellow,

output: orange).

0 CLEAR CUE button

Cancels all cue selections simultaneously.

NOTE

If you press the CUE meter in the Function Access Area, all cue selections will be cleared.

A Meter section

This field indicates the output level of the cue L/R channels.

B CUE OUTPUT button

Switches the cue output on or off.

C CUE LEVEL knob

Indicates the output level of the cut out. You can adjust the values by using the [TOUCH

AND TURN] knobs.

D CUE OUT PATCH button

Press this button to open the PORT SELECT window, in which you can select an output

port to patch to the cue out L/R channels.

*1. QL1: 1-32

*2. QL1: 1-8

 FADER CUE RELEASE field

Move the fader of the channel that is cued to set the FADER CUE RELEASE function for

releasing the cue.

E ON button

Switches the FADER CUE RELEASE function on or off.

F THRESHOLD knob

Sets the fader value for releasing the cue. If the fader value exceeds the value set with

this knob, the cue is released.

 SOLO field

Determines the Solo function parameters.

With the Solo function, only the signal of the input/output channel or DCA for which the [CUE]

key is pressed is output from MIX, MATRIX, and STEREO on each bus. All other channels or

DCA are muted.

G SOLO SAFE popup button

When the SOLO SAFE popup button is pressed, the SOLO SAFE popup window (which

specifies soloed channels that are not muted) appears.

Here you can specify the channels that will be excluded from Solo operations. (You can

specify more than one.) The channels that are selected here will not be muted when

SOLO mode is enabled. This function is convenient if, for example, you want to protect

certain channels from being set to SOLO mode accidentally, such as the main STEREO

channels and MIX channels that send signals to an external recorder.

DANTE1–64

Output channels 1–64 to audio network

OMNI1–16

OMNI OUT jacks 1–16

DIGI OUT L/R DIGITAL OUT jack on the QL unit

SLOT1-1–SLOT2-16 Output channels 1–16 of an I/O card installed in slots 1–2