User Manual

Input and output patching

Reference Manual

Changing the input patch settings

NOTE

• You can also select an input port from the GAIN/PATCH window.

• The OVERVIEW screen appears when you press a USER DEFINED key to which OVERVIEW is

assigned.

PATCH/NAME screen

1 PATCH button

Indicates the currently-selected input port. If you press this button when selecting an

icon or changing the channel name, you will return to the input port select screen.

2 Channel icon button

Indicates the icon that is selected for the corresponding channel. When you press this

button, a screen will appear in which you can select an icon or sample name.

3 Channel name input box

Indicates the name that is assigned to the corresponding channel. When you press this

field, a keyboard window allowing you to change the channel name will appear.

4 Category select list

Selects the category of input port. The categories correspond to the following input

ports. The displayed categories vary depending on the channel type.

• DANTE1–32 .......... DANTE1–DANTE32

• DANTE33–64 ........ DANTE33–DANTE64 (QL5 only)

• INPUT/PB OUT ..... INPUT1–32

, PB OUT(L), PB OUT(R)

• SLOT1 ................... SLOT1(1)–SLOT1(16)

• SLOT2 ................... SLOT2(1)–SLOT2(16)

• EFFECT RACK ..... FX1L(A)–FX8R(B)

• PREMIUM RACK .. PR1L(A)–PR2R(B)

*1. QL1: INPUT1–16

STEP

Press the Bank Select keys in the Fader Bank section and the [SEL] keys on the top

panel to select the input channel you want to operate.

2. Press the channel number/channel name field on the OVERVIEW screen.

3. Select the type of port in the category select list on the PATCH/NAME screen, and

use the port select buttons to select the input port.

OVERVIEW screen PATCH/NAME screen

2 73