User Manual

Setup

Reference Manual

202

 Logging-in as Guest

 Logging-in as a User

To log-in as a User, you will use a user authentication key saved in the console or on a USB

flash drive. If using a USB flash drive, you may also log-in using a user authentication key

created on a different QL series console.

With a user authentication key stored in the console

NOTE

• If no password has been set, you will simply be logged-in in step 3 when you press the LOGIN

button.

• If the password was incorrect, a message of “Wrong Password!” will appear near the bottom of

the screen.

With a user authentication key stored in a USB flash drive

STEP

1. In the Function Access Area, press the SETUP button.

2. In the SETUP screen, press the CURRENT USER button.

3. In the LOGIN window, press the GUEST button, and then press the LOGIN button.

STEP

1. In the Function Access Area, press the SETUP button.

2. In the SETUP screen, press the CURRENT USER button.

3. In the LOAD FROM INTERNAL STORAGE field of the LOGIN window, choose the user

authentication key with which you want to log in, and press the LOGIN button.

4. Enter the password and press the OK button.

SETUP screen LOGIN window

STEP

1. Connect the USB flash drive to the USB connector.

2. In the Function Access Area, press the SETUP button.

3. In the SETUP screen, press the CURRENT USER button.

4. In the LOAD FROM USB STORAGE field of the LOGIN window, press the (LOAD .CLU

FILE) button.

5. In the SAVE/LOAD window, choose the user authentication key with which you want

to log in.

6. Press the LOAD button.

7. Enter the password and press the OK button.

SETUP screen LOGIN window