User Manual
Input and output patching
Reference Manual
21
INSERT IN HA field
This field will appear if you have selected an input port (that features a head amp) as the
insert-in.
6 +48V button
Switches head amp phantom power (+48V) (currently-selected for insert 1 and insert 2)
on or off.
7 A.GAIN knob
Indicates the currently-selected head amp analog gain setting for insert 1 and insert 2.
You can use the [TOUCH AND TURN] knob to adjust the gain.
NOTE
• If you have selected the INPUT jack on the QL console as
the input port for insert-in, make the HA settings in the
INSERT IN HA field.
• Even if the INSERT ON/OFF button is OFF, the signal
selected for insert-out will continue to be sent.
8 HA meter
Displays the level of the currently-selected head amp input signal for insert 1 and insert
2.
9 Close button
Closes the screen.
INSERT screen (8ch)
1 Channel select button
Selects the channel to set. The channel icon, color, and number appear.
2 INSERT ON/OFF button
Switches the insert on or off. The currently-specified insert point setting appears above
the button.
3 INSERT OUT button
Displays the currently-selected port for insert 1 and insert 2. Press this button to open
the PORT SELECT window, in which you can select an output port.
4 INSERT IN button
Displays the currently-selected port for insert 1 and insert 2. Press this button to open
the PORT SELECT window, in which you can select an input port. You can also view the
insert-in level by checking the indicator located to the right of this button.
PORT SELECT window
Displayed when you press either the INSERT OUT or INSERT IN button in the one-channel
or the eight-channel INSERT/DIRECT OUT window. Set the input/output port used for
insertion.
1 Category select list
Selects the category of port. The categories correspond to the following ports. The
displayed categories vary depending on the channel type.
• DANTE1–32........................... DANTE1–DANTE32
• DANTE33–64......................... DANTE33–DANTE64 (QL5 only)
• INPUT .................................... INPUT1–32 (QL5), INPUT1–16 (QL1) (input channels
only)
• OUTPUT/DIGITAL ................. OMNI OUT1–16, DIGITAL OUT L/R (output channels
only)
• SLOT1.................................... SLOT1(1)–SLOT1(16)
• SLOT2.................................... SLOT2(1)–SLOT2(16)
3
4
3
2
1
4
1
2
3