User Manual

Input channels
Reference Manual
30
2 PATCH button
Press this button to display the PORT SELECT window to patch the input port to the
input channel.
PORT SELECT window
• TAKE FROM PORT button
The HA settings of the port will take priority. Even if you change the patching, the HA
settings of the port will remain unchanged.
• TAKE FROM CHANNEL button
The HA settings of the channel will take priority. The HA settings of the port that had
been previously patched will be copied to the newly-patched port.
If the channel’s HA settings are selected, the following HA settings will be copied from
the channel to the port that is patched. If you patch the input channel from an input that
does not have these settings (i.e., that does not have a HA), the default values will be
specified.
NOTE
If you’re newly patching a previously-unpatched input channel, the default values will be specified
if the HA INFO field’s TAKE FROM CHANNEL button is pressed.
3 HA section
Appears if the head amp is patched to the input channel.
NOTE
If the slot (for which the connection to the head amp is not recognized) is patched, the type of the
MY card will be displayed.
• +48V button
This button will appear for the input channel to which the head amp has been patched.
Press the button to switch phantom power (+48V) on or off.
• A.GAIN (analog gain) knob
Indicates the analog gain of the head amp. You can use the [TOUCH
AND TURN] knob to adjust the gain. If the Gain Compensation function
is turned on, an indicator will appear, showing the position of the
analog gain when the function is turned on.
• Level meter
Indicates the input signal level.
• GC (Gain Compensation) button
Switches the Gain Compensation function on or off for that channel.
3 HA section (If patched to a wireless mic)
•Frequency
Indicates the frequency that is currently set for the RF signal.
• RX.GAIN knob
Sets the HA gain for the receiver. The level meter located at the immediate right of the
knob indicates the input level.
NOTE
For more information about the relationship between the number of bars and the actual strength
of the signal, refer to the manual from Shure.
• MUTE indicator
Indicates the mute status (on/off) of the audio signal for the receiver.
HA setting Default value
HA gain amount –6dB
HPF on/off Off
Phantom power on/off Off
Gain compensation on/off Off
TAKE FROM PORT button
TAKE FROM CHANNEL button