User Manual

Input channels

Reference Manual

 LR-MONO

Although the result is a monaural signal that is the summation of signals from both channels,

the R channel of the stereo input channel is muted.

NOTE

• When you set LR-MONO, the PAN mode is selected at the same time. In addition, the PAN knob

is set to the center position.

• When you set LR, L-MONO, or R-MONO, the BALANCE mode is selected at the same time. In

addition, the BALANCE knob is set to the center position.

 Setting procedure

If a stereo input channel is selected, the SELECTED CHANNEL VIEW screen will appear as

shown below.

1 LR-MONO SELECT field

Select one of the four buttons. The button you select lights up, and the others go off.

If a stereo input channel is selected, the OVERVIEW screen will appear as shown below.

2 LR-MONO SELECT button

This a toggle button. The setting switches each time the button is pressed.

Normal STEREO setting

L-MONO

R-MONO

LR-MONO