User Manual

OUTPUT channels

Reference Manual

Correcting delay between channels (Output Delay)

This Output Delay function is useful when you want to correct the timing of output signals sent

to speakers that are located at a distance from each other.

OUTPUT PORT screen

1 Slot number/Card type

If an output channel of slot 1–2 is selected for operations, this area indicates the slot

number and the type of I/O card installed in that slot.

2 DELAY SCALE button

Press this button to open the DELAY SCALE window, in which you can select the unit for

the delay time.

3 Output Port

This is the type and number of the output port to which the channel is assigned.

4 Channel select button

Enables you to select the channel that you want to assign to the output port. The name

of the currently-selected channel is displayed.

5 Delay time knob

Sets the delay time of the output port. Press the knob to select it, and then operate the

[TOUCH AND TURN] knob. The millisecond delay time value is indicated above the

knob, and the delay time value in the units selected in the DELAY SCALE window is

indicated below the knob.

NOTE

If you have selected ms (millisecond) as the scale, the delay time value will not appear above the

knob.

STEP

1. In the Function Access Area, press the SETUP button.

Press the OUTPUT PORT button in the SYSTEM SETUP field located in the center of the

SETUP screen.

3. Specifies the delay time, and turns on the DELAY button.

SETUP screen OUTPUT PORT screen