User Manual

Channel Job

Reference Manual

 Selecting the channels that will belong to a specific mute group

NOTE

• You may assign a single channel to more than one mute group.

• The DCA/MUTE GROUP field of the OVERVIEW screen indicates the mute group(s) to which

each channel is assigned. Numbers that are lit red in the lower line of this field indicate the mute

groups to which that channel belongs.

• If the dimmer level is set to any level other than -∞ dB, these numbers will light orange.

For a channel for which the Mute Safe function (page 70) has been turned on, an “S” indicator

will light up green at the right end of the bottom row.

DCA/MUTE GROUP ASSIGN MODE window

Here you can select the channels that will be assigned to each mute group.

1 CLEAR ALL button

Clears all channels that are assigned to the currently-selected mute group.

2 DCA GROUP ASSIGN/MUTE GROUP ASSIGN buttons

Toggle between the DCA GROUP ASSIGN window and MUTE GROUP ASSIGN window.

3 Mute group assign field

This area displays the channels assigned to the currently-selected mute group.

While this window is displayed, press the [SEL] key for the channel that you want to

assign to the mute group. The channel will be assigned to the mute group, and the

on-screen fader for that channel will turn red. Press the same [SEL] key once again if you

want to remove the channel from the group.

If the MUTE SAFE button is on, this field displays the channels that enabled for mute safe

(that is, excluded from the mute groups). The operation procedure to apply or cancel

mute safe to the channels is the same as that for assigning or removing channels to or

from a mute group. The on-screen faders of the assigned channels will turn green.

4 NAME EDIT button

Edits the group name of the currently-selected mute group.

When you press this button the keyboard window will appear, allowing you to enter or

edit the text.

STEP

1. In the Function Access Area, press the CH JOB button.

2. Press the MUTE GROUP button in the CH JOB menu.

3. Use the mute group master buttons in the DCA/MUTE GROUP ASSIGN MODE

window to select the mute group to which you want to assign channels.

4. Press the [SEL] key for the input channels/output channels that you want to operate

(multiple selections are allowed).

Function

Access Area

CH JOB