User Manual

Channel Job

Reference Manual

CH COPY MODE window

This window enables you to copy channel settings.

1 SOURCE CH field

Displays the copy-source channel. While this window is displayed, press a [SEL] key on

the top panel to select a channel. The selected channel will be highlighted in this field.

If you want to re-select the copy-source channel, press this field.

If the copy source is a MIX/MATRIX channel, buttons will

appear so you will be able to select parameters to copy.

If these buttons are turned on, the following parameters

will be copied:

•MODULE PARAMETERS button

Selected channel module parameters

• WITH MIX SEND/WITH MATRIX SEND button

SEND parameters of signals sent to the selected channel

Function

Access Area

CH JOB

1 4 2 3

Before selection After selection