User Manual

Then, this result is converted to the destination model based on the console
compatibility policy.
4. Scene 003
Light green rectangle Scene 003 is recalled onto the result of previous Scene 002
recall.
Scene 003 Focus is set to “ALL”, but there is a global Recall Safe setup. Scene 003
recall result replaces all parts other than the Recall Safe parameters, which is shown
by the light green rectangle with a smaller yellow rectangle.
Then, this result is converted to the destination model based on the console
compatibility policy.
The key point here is that the converted Scenes aren’t the same as the Scenes in the source
file as shown below.
This means, if you recall the converted Scenes sequentially from 001 to 003 in destination
consoles, you won’t face different data reproduction (apart from parameters filled by default or
substitute values). But if you recall the converted Scenes in a different order without setting up
the Recall Filtering function manually on the destination console, you could face some
different data reproduction compared to that on the source console.
So please check your Recall Safe / Selective Recall / Focus settings before proceeding to mix
a show!
Recall
Scene 002
Scene 002
Recall Safe
Safe
Focus
Focus
=
Previous Result
Result
Conversion
Recall process in source console
Destination console
Recall
Scene 003
Scene 003
Focus
=
Previous Result
Result
ALL
Conversion
Recall Safe
Safe
Recall process in source console
Destination console
Scene 001
Current
Scene 002
Scene 003
Scene 001
Scene 002
Scene 003
Current
Source data
Converted data
Manual Development Group
©2015 Yamaha Corporation
Published 08/2020 YJMK-F0