User Manual

QL Editor Owner’s Manual

Synchronizing QL Editor

When QLEditor starts up, the parameter settings on the console and the parameter settings in QLEditor may be different.

Therefore, you must first match the parameter settings on the console with those in QLEditor. This operation is called

“synchronization.” Follow the steps below to synchronize QLEditor.

1 Select [Synchronization], then [Re-synchronize].

The following window opens.

If QL Editor is in the offline status the

[Re-synchronize] function is not available.

2 Select whether you want to transfer your settings to

QL Editor, or vice versa.

Console -> PC:

Transfers the current parameter settings of

your console to the QLEditor.

PC -> Console: Transfers the current parameter settings in QLEditor to your console.

At this time, the All Libraries option determines whether or not Library data is synchronized.

If you select the [Dante Setup and I/O Device] check box, Dante settings will also be synchronized. Clear this check box

if you want to preserve the Dante settings of the QL console when using PC -> Console.

• The Dante settings of the QL console will be copied to QL Editor if you clear this check box and select

PC -> Console, or if you select Console -> PC.

• During synchronization using the PC -> Console option, if the QL unit contains read-only scenes, a

dialog appears asking you whether you want to copy the read-only scenes to QL Editor. If you select

not to copy, the read-only scenes will not be synchronized.

If you recall a read-only scene that is not synchronized, the operation between the QL unit and QL Editor

will not be synchronized.

3 Click [OK].

Do not operate the console while synchronization is in progress.

Offline Edit Function

If you do not want to synchronize your console with QLEditor, select [Offline Edit] from the [Synchronization] menu. To

apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC -> Console

option to synchronize the console with QLEditor.

The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the Master window.

Some effect parameters in the console change their displayed values depending on the sampling fre-

quency. If you switch QLEditor from OFFLINE to ONLINE, displayed parameter values may change

because QLEditor loads the sampling frequency from the console and updates the display.

Other Functions

❏ Resetting to the default value (Ctrl( )+click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl>(< >) key and click the mouse button to

reset the value to the default (e.g., to reset a pan setting to Center).

However, the channel faders and the send knobs and bar graphs can be set to –∞ regardless of the default value.

❏ Ctrl( )+Shift+Click

Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the

<Ctrl>(< >) key and <Shift> key to set the nominal value regardless of the default value.

NOTE