User Manual

QL Editor Owner’s Manual
25
The numbers and alphabetical letters at the right of the fader indicate the DCA group and
mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status
of the channel.
• Click the indicator area to switch between 3 indicators.
• While holding down the <Ctrl> (< >) key of your computer keyboard, drag
& drop the area around the fader to copy the channel (CH COPY).
The fader is color-coded and indicates status as follows:
White: You can adjust the input level of the MIX channel (normal mode.)
Gray: MIX channel is off.
Other colors: You can adjust the send level (SENDS ON FADER mode.)
B Channel number
Indicates the number of the MIX channel. You can double-click this number to open the
Selected Channel window for this channel. If you hold down the <Ctrl>(< >) key of your
computer keyboard and double-click this, the Selected Channel window will open as an
additional view.
C Channel name
This is a text box that displays the channel name. You can also edit the channel name in this
text box. You can right-click (<control> key + click) the text box to select a channel color.
The numbers of mute groups to
which this channel belongs are
shown in red when those groups
are muted. If the dimmer levels for
those groups are set in a non-
default status, those are shown in
orange.
If this channel is set
to Recall Safe, the
R character is
shown in green.
If this channel is set to Mute Safe,
the M character is shown in green.
This level meter is dis-
played at the same
metering point with the
input channel in Meter
window setup (➥ p.84.)
The numbers of DCA
groups to which this channel
belongs are shown in yellow.
Mute Group indicator Level Meter DCA Group indicator
NOTE