User Manual

QL Editor Owner’s Manual

❏ DELAY

1 ON

Turns the delay on/off of the currently selected channel.

2 Delay time

Drag the knob in the screen to adjust the delay time of the currently selected channel.

❏ INSERT1/2 (except for ST IN channels)

1 POINT (Insert point)

Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON.

2 ON

Enables/disables insert-in/out.

3 OUT (Insert out)

Click this to select the output port that will be assigned to insert-out, from the following choices.

4 IN (Insert in)

Click this to select the input port that will be assigned to insert-in, from the following choices.

NONE No assignment

DANTE 1–32, DANTE 33–64 (only QL5) DANTE OUTPUT 1–32, DANTE OUTPUT 33–64 (only QL5)

OMNI 1–8, OMNI 9–16 (only QL5) OMNI OUT jacks 1–8, OMNI OUT jacks 9–16 (only QL5)

SLOT1-1, SLOT1-2...SLOT2-15, SLOT2-16 Output channels of an I/O card installed in slots 1–2

GEQ1L(A), GEQ1R(B)...GEQ8L(A), GEQ8R(B) L/R inputs of GEQ rack 1–8

FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R inputs of EFFECT rack 1–8

PR1L(A), PR1R(B)...PR8L(A), PR8R(B) L/R inputs of PREMIUM rack 1–8

DIGI L, DIGI R L/R channels of the DIGITAL OUT jack

NONE No assignment

DANTE 1–32, DANTE 33–64 (only QL5) DANTE INPUT 1–32, DANTE INPUT 33–64 (only QL5)

INPUT 1–16, INPUT 17–32, (only QL5) INPUT jacks 1

–

16, INPUT jacks 17

–

32 (only QL5)

SLOT1-1, SLOT1-2...SLOT2-15, SLOT2-16 Input channels of an I/O card installed in slots 1–2

GEQ1L(A), GEQ1R(B)...GEQ8L(A), GEQ8R(B) L/R outputs of GEQ rack 1–8

FX1L(A), FX1R(B)...FX8L(A), FX8R(B) L/R outputs of EFFECT rack 1–8

PR1L(A), PR1R(B)...PR8L(A), PR8R(B) L/R outputs of PREMIUM rack 1–8

1 2