User Manual

QL Editor Owner’s Manual

3 Module graphic

This area shows a graphic of the effect module, the GEQ module or the PEQ module that is currently assigned to the

rack, and the parameters of that module. You cannot edit the parameters on this page. Double-click this to open the

module editor for that rack unit. By holding down the <Ctrl>(< >) key of your computer keyboard and double-click-

ing this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked

with the RACK popup window of the QL itself.

4 Input meter/Output meter

These indicate the level of the signals being input and output from the effect module, the GEQ module or the PEQ

module.

5 Output patch

Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to

the L/R output channels of the internal effect.

6 BYPASS

This switches the effect module or the GEQ module between active and bypassed states. An effect module is active

when the BYPASS button is dark.

INS1 ST L, INS1 ST R, INS1 M(C) Insert-out 1 of STEREO channel L/R or the MONO channel

INS2 CH1–CH64 (CH 1–32 on the QL1) Insert-out 2 of input channel 1–64 (1–32 on the QL1)

INS2 MIX1–MIX16 MIX channel 1–16 insert out 2

INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert out 2

INS2 ST L, INS2 ST R, INS2 M(C) Insert-out 2 of STEREO channel L/R or the MONO channel

NONE No assignment

CH 1–64 (CH 1–32 on the QL1) INPUT CH 1–64 (CH 1–32 on the QL1)

STIN1L–STIN8R ST IN channel 1–8 (L/R)

INS1 CH1–CH64 (CH 1–32 on the QL1) Insert-in 1 of INPUT CH1–64 (1–32 on the QL1)

INS1 MIX1–MIX16 MIX channel 1–16 insert in 1

INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert in 1

INS1 ST L, INS1 ST R, INS1 M(C) Insert-in 1 of STEREO channel L/R or the MONO channel

INS2 CH1–CH64 (CH 1–32 on the QL1) Insert-in 2 of input channel 1–64 (1–32 on the QL1)

INS2 MIX1–MIX16 MIX channel 1–16 insert in 2

INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert in 2

INS2 ST L, INS2 ST R, INS2 M(C) Insert-in 2 of STEREO channel L/R or the MONO channel