User Manual

QL Editor Owner’s Manual
76
1 Rack No. (Rack selection)
Select the rack module of the EFFECT rack that you want to
control.
2 BYPASS
This button temporarily bypasses the effect.
3 CUE
This button cue-monitors the output of the currently selected
effect.
In the ONLINE state, if MATRIX bus channels 7 and 8 can be
used as a second cue, the indication is fixed at “CUE A” by the
settings of the console.
If the Channel Select/Sends On Fader checkbox
in the System Setup dialog box is not checked,
the [CUE] button will be hidden in the screen.
4 EFFECT NAME
Indicates the title of the currently selected effect.
5 TYPE (EFFECT TYPE)
Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click the text
box, and select the desired effect type from the popup menu that appears.
6 LIBRARY
This button accesses the effect library. Clicking this button will open the EFFECT page of the Library window.
7 Input patch
Click the L CHANNEL or R CHANNEL area, and choose one of the fol-
lowing as the signal route that will be patched to the L/R input channels of
the internal effect.
The channel name is shown in the boxes immediately below.
NONE No assignment
MIX 1–16 MIX channel 1–16
MATRIX1–8 MATRIX channel 1–8
ST L, ST R, MONO(C) STEREO channel L/R, MONO channel
INS1 CH1–CH64
(CH 1–32 on the QL1)
Insert-out 1 of INPUT CH1–64
(1–32 on the QL1)
INS1 MIX1–MIX16 MIX channel 1–16 insert out 1
INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert out 1
INS1 ST L, INS1 ST R, INS1 M(C)
Insert-out 1 of STEREO channel L/R or
the MONO channel
INS2 CH1–CH64
(CH 1–32 on the QL1)
Insert-out 2 of input channel 1–64
(1–32 on the QL1)
INS2 MIX1–MIX16 MIX channel 1–16 insert out 2
INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert out 2
INS2 ST L, INS2 ST R, INS2 M(C)
Insert-out 2 of STEREO channel L/R or
the MONO channel
21 3
45 6
NOTE
8
0
9
7
A