User Manual

QL Editor Owner’s Manual

3 Module graphic

This area shows a graphic of the PREMIUM rack module that is currently assigned to the rack, and the parameters of

that module. Double-click this to open the module editor for that rack unit. By holding down the <Ctrl>(< >) key of

your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional edi-

tors, the rack select buttons are not linked with the RACK popup window of the QL itself.

4 Input meter/Output meter

This indicates the level of the signal that is being input and output from the currently selected PREMIUM rack module.

5 Output patch

Click the CHANNEL field (Click L CHANNEL or R CHANNEL area for the stereo EQ or compressor), and choose one

of the following as the signal route that will be patched to the output channel(s) of the currently selected PREMIUM

rack module.

6 BYPASS

This switches the PREMIUM rack module between active and bypassed states. A PREMIUM rack module is active

when the BYPASS button is dark.

INS2 CH1–CH64 (CH 1–32 on the QL1) Insert-out 2 of input channel 1–64 (1–32 on the QL1)

INS2 MIX1–MIX16 MIX channel 1–16 insert out 2

INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert out 2

INS2 ST L, INS2 ST R, INS2 M(C) Insert-out 2 of STEREO channel L/R or the MONO channel

NONE No assignment

CH 1–64 (CH 1–32 on the QL1) INPUT CH 1–64 (CH 1–32 on the QL1, only for rack 1–2)

STIN1L–STIN8R ST IN channel 1–8 (L/R) (only for rack 1–2)

INS1 CH1–CH64 (CH 1–32 on the QL1) Insert-in 1 of INPUT CH1–64 (1–32 on the QL1)

INS1 MIX1–MIX16 MIX channel 1–16 insert in 1

INS1 MTRX1–MTRX8 MATRIX channel 1–8 insert in 1

INS1 ST L, INS1 ST R, INS1 M(C) Insert-in 1 of STEREO channel L/R or the MONO channel

INS2 CH1–CH64 (CH 1–32 on the QL1) Insert-in 2 of input channel 1–64 (1–32 on the QL1)

INS2 MIX1–MIX16 MIX channel 1–16 insert in 2

INS2 MTRX1–MTRX8 MATRIX channel 1–8 insert in 2

INS2 ST L, INS2 ST R, INS2 M(C) Insert-in 2 of STEREO channel L/R or the MONO channel