User Manual

QL Editor Owner’s Manual

In this window you can select the channels that will be assigned to each DCA group and mute group. This window is

divided into four pages; the DCA GROUP ASSIGN page, the MUTE GROUP ASSIGN page, the CHANNEL LINK page,

and OUTPUT CHANNEL LINK page.

DCA GROUP ASSIGN page

Here you can specify the channels that will be assigned to DCA groups 1–16.

1 DCA group

This is the number of the DCA group.

2 DCA group name

This is the name of the DCA group. You can also click the mouse on this area to edit the name.

3 PRE&POST (DCA MUTE TARGET)

These buttons determine whether a Send signal routed to the bus (that features a send point set to PRE) can be muted. Turn

this button on to specify PRE and POST as the mute target. Turn this button off to specify only POST as the mute target.

4 Grid

This grid lets you assign channels (horizontal rows) to DCA groups (vertical columns.) Currently-patched grids are

indicated by a symbol. To enable or disable an assignment, click the desired grid.

Group/Link window

1 2 4 53