User Manual
Table Of Contents
- Como usar este Manual de Referência
- Sumário
- Árvore de funções
- Seção SELECTED CHANNEL (canal selecionado)
- Seção Channel Strip (Seção de cada canal)
- Patch de entrada e saída
- Canais de entrada
- Fluxo do sinal para canais de entrada
- Como especificar o nome do canal, o ícone e a cor do canal
- Definindo as configurações do HA (amplificador de entrada)
- Emissão do sinal de um canal de entrada para o barramento STEREO/MONO
- Função de panorâmica adicionada (apenas canais de entrada mono)
- Envio de um sinal de um canal de entrada para um barramento MIX/MATRIX
- Indicação no visor do nome do canal
- Correção do atraso entre os canais (Input Delay)
- Saída surround para canais de entrada
- Operações da biblioteca de canais
- Canais OUTPUT
- Fluxo do sinal para canais de saída
- Como especificar o nome do canal, o ícone e a cor do canal
- Envio de sinais dos canais MIX para o barramento STEREO/MONO
- Envio de sinais dos canais MIX e STEREO/MONO para barramentos MATRIX
- Corrigindo o atraso entre os canais (Output Delay (atraso de saída))
- Uso da função PORT TO PORT
- Operações da biblioteca de canais
- EQ (equalizador) e dinâmica
- Trabalho de canal
- Memória de cena
- Armazenando e recuperando cenas
- Edição de memórias de cena
- Uso da função Global Paste
- Uso da função Focus Recall
- Uso da função Fade
- Emitindo um sinal de controle para um dispositivo externo juntamente com a chamada de cena (GPI OUT)
- Reproduzindo um arquivo de áudio vinculado a uma chamada de cena
- Uso do modo de visualização
- Funções Monitor e Cue
- Talkback e Oscilador
- Meters
- EQ gráfico, EQ paramétrico, efeitos e Premium Rack
- Dispositivos de E/S e os amplificadores principais externos
- Usando um dispositivo de E/S
- Como controlar remotamente uma unidade da série R
- Função de controle HA adicionada do equipamento de terceiros
- Como controlar remotamente um amplificador
- Controle remoto da unidade WIRELESS
- Usando um amplificador de entrada externo
- Controlando remotamente um amplificador de entrada externo
- Controle de um amplificador de entrada externo
- MIDI
- Gravador
- Controle AFC IMAGE
- Instalação
- Sobre a tela SETUP
- Preferências
- Teclas USER DEFINED
- Funções que podem ser atribuídas às teclas USER DEFINED
- Botões giratórios USER DEFINED
- Funções que podem ser atribuídas aos botões giratórios USER DEFINED
- Banco de faders personalizados
- Console Lock
- Salvando e carregando dados de configuração de uma unidade flash USB
- Função de remontagem adicionada a unidades flash USB
- Configurações do Word Clock e dos compartimentos
- Usando conexões em cascata
- Configurações básicas dos barramentos MIX e MATRIX
- Como ligar/desligar toda a fonte de alimentação phantom
- Como especificar o brilho da tela sensível ao toque, LEDs, visores de nome de canal e lâmpadas
- Definição da data e da hora do relógio interno
- Configuração do endereço de rede
- Configurando a rede de áudio Dante
- Dante Device Lock
- Compatibilidade com o Dante Domain Manager
- Uso da GPI (General Purpose Interface)
- Função Help
- Outras funções
- Inicializando a unidade com as configurações padrão de fábrica
- Ajustando o ponto de detecção da tela sensível ao toque (função Calibration (calibração))
- Ajustando os faders (função Calibration)
- Fazendo ajustes finos no ganho de entrada e saída (função Calibration)
- Ajuste da cor do LED (função Calibration)
- Como ajustar o brilho do visor de nome do canal
- Como ajustar o contraste do visor de nome do canal
- Inicializando as configurações da rede de áudio Dante
- Procedimento de atualização alterado para o firmware NAME SUB CPU
- Função de atualização adicionada ao firmware Dante
- Mensagens de advertência/erro
- Índice
- Data List
Data List
40
4.2.3 Module Name
*1) 0: CH1 – 63: CH64
72: ST IN 1L – 79: ST IN 4R
*2) 256: MIX 1 – 271: MIX 16
*3) 512: MATRIX 1 – 519: MATRIX 8
*4) 1024: STEREO L – 1026: STEREO C
*5) 512: will be used if the recalling or storing data is only one.
*6) 0: GEQ1A, 1: GEQ1B, 2: GEQ2A, ... 36: GEQ19A, 37:GEQ19B
38: EFFECT GEQ1A, 39: EFFECT GEQ1B,
40: EFFECT GEQ2A, ... 52: EFFECT GEQ8A, 53: EFFECT GEQ8B
*7) 0: Effect1- 7: Effect8
*8) 1280: CH1 – 1343: CH64
1352: ST IN 1L – 1367: ST IN 8R
*9) 0: Premium Rack 1A, 1: Premium Rack 1B,
2: Premium Rack 2A, ... 14: Premium Rack 8A, 15: Premium Rack 8B
4.3 FUNCTION CALL – LIBRARY EDIT –
4.3.1 Format (PARAMETER CHANGE)
Reception
Data will be received when [PARAMETER CHANGE Rx] is on and the Device
number of both [Rx CH] and SUB STATUS match.
The data will be echoed when [PARAMETER CHANGE ECHO] is on.
The corresponding memory/library will be changed immediately the data is
received.
Transmission
PARAMETER CHANGE will be sent in reply to Request.
If [PARAMETER CHANGE ECHO] is on, the message will be sent as it is.
4.3.2 Function Name
4.3.3 Module Name
Module Name
Scene “SCENE___”
Input EQ “INEQ____”
Output EQ “OUTEQ___”
Dynamics “DYNA____”
Input CH “INCHNNL_”
Output CH “OUTCHNNL”
GEQ “GEQ_____”
8BandPEQ “8PEQ____”
Effect “EFFECT__”
Portico5033 “P5033___”
Portico5043 “P5043___”
Portico5045 “P5045____”
U76 “U76_____”
Opt-2A “OPT-2A__”
EQP-1A “EQ-1A___”
Dynamic EQ “DYNAEQ__”
Buss Comp 369 “BSCMP369”
MBC4 “MBC4____”
Dante Input Patch “DANTEIN_”
Function Number Channel*1) tx/rx
“LibStr__” SCENE 1-300 *5)
tx/rx
INPUT EQ LIB 41-199 *1)
tx/rx
OUTPUT EQ LIB 4-199 *2) *3) *4)
tx/rx
Dynamics LIB 42-199 *1) *2) *3) *4) *8)
tx/rx
INPUT CH LIB 1-199 *1)
tx/rx
OUTPUT CH LIB 1-199 *2) *3) *4)
tx/rx
GEQ LIB 1-199 *6)
tx/rx
8BandPEQ LIB 1-199 *6)
tx/rx
EFFECT LIB 28-199 *7)
tx/rx
Premium Effect LIB 1-100 *9)
tx/rx
Dante Input Patch LIB 1-10 *5)
tx/rx
“LibUnStr” SCENE 1-300 0
tx
INPUT EQ LIB 41-199 0
tx
OUTPUT EQ LIB 4-199 0
tx
Dynamics LIB 42-199 0
tx
INPUT CH LIB 1-199 0
tx
OUTPUT CH LIB 1-199 0
tx
GEQ LIB 1-199 0
tx
8BandPEQ LIB 1-199 0
tx
EFFECT LIB 28-199 0
tx
Premium Effect LIB 1-100 0
tx
Dante Input Patch LIB 1-10 0
tx
“LibRcl__” SCENE 0-300 *5)
tx/rx
INPUT EQ LIB 1-199 *1)
tx/rx
OUTPUT EQ LIB 1-199 *2) *3) *4)
tx/rx
Dynamics LIB 1-199 *1) *2) *3) *4) *8)
tx/rx
INPUT CH LIB 0-199 *1)
tx/rx
OUTPUT CH LIB 0-199 *2) *3) *4)
tx/rx
GEQ LIB 0-199 *6)
tx/rx
8BandPEQ LIB 1-199 *6)
tx/rx
EFFECT LIB 1-199 *7)
tx/rx
Premium Effect LIB 0-100 *9)
tx/rx
Dante Input Patch LIB 0-10 *5)
tx/rx
“LibUnRcl” SCENE 0 *5)
tx
INPUT EQ LIB 0 *1)
tx
OUTPUT EQ LIB 0 *2) *3) *4)
tx
Dynamics LIB 0 *1) *2) *3) *4) *8)
tx
INPUT CH LIB 0 *1)
tx
OUTPUT CH LIB 0 *2) *3) *4)
tx
GEQ LIB 0 *6)
tx
8BandPEQ LIB 0 *6)
tx
EFFECT LIB 0 *7)
tx
Premium Effect LIB 0 *9)
tx
Dante Input Patch LIB 0 *5)
tx
“LibStrUd” SCENE 0 0
“LibRclUd” SCENE 0 0
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00011001 19
QL Series
DATA CATEGORY 00000000 00
OTHER DATA
FUNCTION NAME 01001100 "L"
(ASCII CODE)
01101001 "i"
(ASCII CODE)
01100010 "b"
(ASCII CODE)
Function Number Channel*1) tx/rx
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0sssssss sh
number -source start High
0sssssss sl
number -source start Low
0eeeeeee eh
number -source end High
0eeeeeee el
number -source end Low
0ddddddd dh
number -destination start High
0ddddddd dl
number -destination to start Low
EOX 11110111 F7
End of exclusive
Function Name
Copy “LibCpy__”
Paste “LibPst__”
Clear “LibClr__”
Cut “LibCut__”
Insert “LibIns__”
Edit Undo “LibEdtUd”
Module Name Function
SCENE LIB “SCENE___” Copy, Paste, Clear, Cut, Insert, EditUndo
INPUT EQ LIB “INEQ____” Clear Only
OUTPUT EQ LIB “OUTEQ___” Clear Only
Dynamics LIB “DYNA____” Clear Only
INPUT CH LIB “INCHNNL_” Clear Only
OUTPUT CH LIB “OUTCHNNL” Clear Only
GEQ LIB “GEQ_____” Clear Only
8BandPEQ LIB “8PEQ____” Clear Only
EFFECT LIB “EFFECT__” Clear Only
Portico5033 LIB “P5033___” Clear Only
Portico5043 LIB “P5043___” Clear Only
Portico5045 LIB “P5045____” Clear Only
U76 LIB “U76_____” Clear Only
Opt-2A LIB “OPT-2A__” Clear Only
EQP-1A LIB “EQ-1A___” Clear Only
DynamicEQ LIB “DYNAEQ__” Clear Only
Buss Comp 369 LIB “BSCMP369” Clear Only
MBC4 LIB “MBC4____” Clear Only
Dante Input Patch LIB “DANTEIN_” Clear Only