User Manual

ManualsBrandsYamaha ManualsAudio MixerQL Series

121

122

123

124

125

126

127

128

129

130

Graphic EQ, Parametric EQ, effects, and Premium Rack

Reference Manual

127

 Inserting a PEQ in a channel

This section explains how to insert a PEQ into the selected channel for use.

NOTE

• You can view the input and output levels of the PEQ in the rack in the GEQ or EFFECT field.

• For details on PEQ operations, refer section “PEQ EDIT window” (page 127).

PEQ EDIT window

1 PEQ graph

Displays the parameter values for the PEQ and filter.

2 INPUT button

Press this button to open the CH SELECT window, in which you can select the input

source of the rack. The operating procedure is the same as for the INPUT button in the

GEQ field.

3 OUTPUT button

Press this button to open the CH SELECT window, in which you can select the output

destination of the rack. The operating procedure is the same as for the OUTPUT button

in the GEQ field.

4 LIBRARY button

Press this button to open the PEQ Library window.

5 DEFAULT button

Press this button to restore the default parameter setting.

6 COPY button

All EQ parameter settings will be copied in buffer memory.

7 PASTE button

Press this button to paste the copied settings from buffer memory to the current EQ. If

no valid data has been copied in the buffer memory, nothing will happen.

8 COMPARE button

Press this button to swap between the current EQ settings and the data stored in buffer

memory. If no valid data has been copied in the buffer memory, nothing will happen.

9 RACK LINK button

Press this button to open the RACK LINK window, in which you can link adjacent PEQ

units.

In the case of an 8BandPEQ, PEQ (A) and PEQ (B) within the same rack will be linked.

•GEQ x

y button ( “x” and “y” are the rack number, or the rack number and

alphabetical character A or B)

The parameters of “x” will be copied to “y,” and then linked.

•GEQ y

x button

The parameters of “y” will be copied to “x,” and then linked.

STEP

1. Refer to steps 1-8 in “Virtual rack operations” (page 119) to mount a PEQ in a rack

and set its input source and output destination.

2. In the GEQ field rack or the EFFECT field rack, press the rack container in which you

mounted the PEQ.

3. If you're using a stereo source, press the RACK LINK button to link the two PEQ units.

4. Press the PEQ ON/OFF button to turn the PEQ on.

4 31 2 76 8