User Manual

Graphic EQ, Parametric EQ, effects, and Premium Rack

Reference Manual

128

• RESET BOTH button

The parameters of both will be initialized, and then linked.

•CANCEL button

Cancels the link and closes the window.

NOTE

The RACK LINK button is shown only if linking is possible. When you link RACK units, a symbol

will appear in the GEQ field to indicate the linked status.

0 PEQ ON/OFF button

Switches the currently selected PEQ on/off.

A PEQ FLAT button

Press this button to reset the GAIN parameters of all PEQ bands to 0 dB.

All ON buttons for HPF, LPF, and notch filters are turned off.

All other parameter values are maintained and are not reset.

B PEQ IN/OUT level meters

Indicate the peak level of signals before and after the PEQ.

C Rack select tabs

Switch among GEQ 1-8 or EFFECT 1-8. For a rack in which an 8BandPEQ is mounted,

the tabs will be split as xA and xB (x is the rack number).

NOTE

For details on how to use the buttons, refer to “Using the tool buttons” in the separate Owner's

Manual.

D RTA button

Turn this button on to overlay a frequency response graph on the EQ.

E HOLD button

Press this button to hold the peak of the graph that displays RTA.

PEQ EDIT window (8PEQ)

1 BYPASS button

You can bypass each band.

2 HPF/LPF NOTCH button

Press this button to switch to the screen for operating HPF/LPF/notch filters.

3 EQ parameter setting knobs

Indicates the Q, FREQUENCY, and GAIN parameters for the BAND1 - BAND8 bands. You

can use the [TOUCH AND TURN] knob to adjust this.

313