User Manual

Input channels

Reference Manual

Channel name display indication

In SENDS ON FADER mode, ON/OFF is indicated for the channel.

On the PREFERENCE page in the USER SETUP pop-up window, the channel number is

shown if NAME DISPLAY is set to “NAME ONLY”.

Correcting delay between channels (Input Delay)

This section explains how to correct delay between input channels by using the Input Delay

function.

This function is useful when you want to correct the phase variance caused by microphone

locations on the stage, to add depth to the sound by using phase variance, or to correct a

delay (a time gap) that may exist between video and audio that are sent from a site for

broadcast on TV.

INPUT DELAY window (8ch)

You can set the on/off status and the value of the input channel delay.

1 DELAY SCALE button

Press the button to display the DELAY SCALE window, in which you can select the unit

for the delay time.

There are five delay scales: meter (meter/sec), feet (feet/sec), sample (number of

samples), ms (milliseconds), and frame (frames). If you select frame as the units, you can

choose from six frame rates: 30, 30D, 29.97, 29.97D, 25, and 24. In this case, fr will

appear as the units in the channel name display.

STEP

1. Press the Bank Select keys in the Fader Bank section and the [SEL] keys on the top

panel to select the input channel.

2. Press the INPUT DELAY field in the SELECTED CHANNEL VIEW screen.

3. Use the [TOUCH AND TURN] knob to set the delay.

4. Press the DELAY ON button.

CHANNEL ON

CHANNEL OFF

Channel number

display

SELECTED CHANNEL VIEW screen INPUT DELAY screen

1 6