User Manual

Monitor and Cue functions
Reference Manual
99
MONITOR window
You can make detailed settings for monitoring. This screen appears when you press the
MONITOR display button or the meter field in the MONITOR screen.
1 SOURCE SELECT field
Select one of the following as the signal source that will be output to the MONITOR bus.
*1. QL1: 9-10–15-16
*2. QL1: 9–16
2 DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates
monitor signals.
• DIMMER LEVEL knob
Adjusts the amount by which the monitor signals will be attenuated when the dimmer
is on.
• DIMMER ON button
Switches the Dimmer function on or off. The monitor signal will be attenuated if this
button is on.
3 TALKBACK DIMMER field
Enables you to make settings for the Dimmer function, which temporarily attenuates
monitor signals when TALKBACK is on.
• TALKBACK DIMMER LEVEL knob
Adjusts the amount by which the monitor level will be attenuated when talkback is on.
• TALKBACK ON indicator
Indicates the on/off status of the dimmer function for talkback.
4 PHONES LEVEL LINK button
Enables you to link the signal level at the PHONES Out jack to the monitor signal level.
If this button is on, the MONITOR FADER LEVEL knob and monitor fader will adjust the
level of the signal sent to the PHONES OUT jack.
5 CUE INTERRUPTION button
Press this button to interrupt the monitor signal by the cue signal. If this button is on
and the cue is enabled, the cue signal will be sent to the monitor output. With the
factory default settings, this function is turned on. If you do not wish to send the cue
signal to the monitor output, switch this button off.
6 MONO MONITOR button
Turn on this button to switch the monitor output signal to mono.
7 MONITOR OUTPUT button
Switches the monitor output on or off.
STEREO L/R STEREO L/R channel signals
MONO (C) MONO channel signal
LCR STEREO L/R + MONO channel signals
INPUT 25-26–31-32
*1
INPUT jacks 25–32
*2
signals (per two channels)
PB OUT Recorder’s PLAYBACK OUT signals
DEFINE The signal(s) selected in the ASSIGN field
LINK
Links the monitor source with the MIX/MATRIX bus
selected in SENDS ON FADER mode.
0
A
23 5
1 4 76
98