User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
70
Edit Power User Code: Specify or edit the power user code.
The power user code is specified only as a four-digit number, using
the same type of setting screen as for the administrator code.
* For a newly created file, the power user code is unset (blank).
Screen Lock: Lets you lock the screen and disable further opera-
tions when no operation has been performed for a specified period of
time in Control mode. Tap the [Screen Lock] field to access the
screen lock setting screen.
Enable: Turns the screen lock function on/off. If this is On
( ), the settings items are shown.
Unlock Code: Specifies the unlock code (a four-digit number) for
screen lock. Overwrite the default value of “0000” to set this.
Select Image: Lets you specify the screen that is shown when the
screen is locked. Specifies the style. Specifying an image
Time: Specifies the time until screen lock occurs.
Menu: When the menu button has not been operated for a certain
length of time in Control mode, the menu can be automatically hid-
den (menu auto close).
Transparent Menu Button: This function makes the closed state
of the menu button ( ) invisible in Control mode.
* Invisible: The menu button exists in its usual position, but cannot be seen
(is not shown). Tapping on that position opens the menu.
* The menu button is invisible only in Control mode; it is always visible in
Design mode regardless of this setting.
Enable Auto-Close: Turns the menu auto close function on/off. If
this is On ( ), the [Time Until Menu Closes] field appears.
Time Until Menu Closes: Specifies the time until auto-close
occurs.
Image Compression: Specifies the compression when loading an
icon or pattern.
Compression: Turns image compression on/off. If this is On
( ), the [Ratio] field is shown.
Ratio: Specifies the image compression ratio (1–100%) for the
Compression setting above.
* This can be edited only if the Compression setting is On.
Offline Indication: Specifies whether, when the device is offline, an
indicator is shown at the upper right of the widget to which the
device’s parameter is assigned.
If this is On ( ), an indicator ( ) is shown when the device is
offline.
No Assign Indication: Specifies whether a clip is shown in the
upper right of a widget to which a device’s parameter is not
assigned.
If this is On ( ), a clip ( ) is shown.