User guide
10
2 Networking Your StudioLive AI Loudspeaker
2.5 Step 5: Naming Your Loudspeakers
SL-Dante-SPK
User Guide
Click on the Device Cong tab and give your loudspeaker a descriptive name (FOH
Left, Center Balcony, etc.).
Power User Tip: Dante device names can be up to 31 characters and are not case
sensitive (e.g., “Guitar wedge” and “guitar Wedge” are treated as the same label). Device
names must start with a letter of the alphabet but numbers and hyphens may also
be used.
5. Disconnect your loudspeaker and repeat Steps 1-4 with any loudspeaker you will
be connecting to your Dante network.