User Manual

Yamaha Professional Audio QL StageMix V7 User Guide
Page 13
3.3.4 Connect and Synchronize with the QL Console
Click the [CONNECT] button to connect to the console and begin the
synchronization process.
The message “Syncing With QL…” will appear while StageMix is
obtaining parameters from the console. After this process is complete,
the Mixer window will appear and StageMix is ready to be used.
Up to 5 iPads running StageMix can be connected to the console
simultaneously.
If StageMix cannot connect with your console, refer to the
Troubleshooting section (11.0
) at the end of this document for possible
solutions.
3.3.5 Edit Mixer Configurations
The parameters of a saved Mixer Configuration can be viewed and
edited by tapping the right arrow button next to a mixer’s name. This
will open the Edit Mixer screen which allows the Name and IP Address
to be verified and edited using the procedures described in section
3.3.2. After editing, press [SAVE MIXER] to save any changes.