User guide
Dugan-MY16 User Guide The Dugan Control Panel
35
Online
This indicator lights to show the unit is online.
Master-slave
This indicates whether this unit is set to NORM (master) or SLAVE mode on the rear panel
switch.
• A single Dugan-MY16 must be set to master.
• If multiple Dugans are linked, set only one to master and the others to slave.
• If external Dugan automatic mixing controllers are linked with one or more Du-
gan-MY16s, one of the Dugan-MY16s must be set to master.
48k-96k
This indicates whether this unit is set to low (44.1 or 48 kHz) or high (88.2 or 96 kHz)
sample rate on the circuit board switch.
Link-audio
This indicates the operating mode selected on the rear panel switch.
Native-legacy
This indicates whether this device is set to native or legacy mode on the circuit board
switch. This allows Yamaha to maintain compatibility with its older mixers.
NOTE: After all controls have been set, the Dugan Control Panel can be disconnected. The
Dugan-MY16 remembers all settings, even after the power is turned off.