User guide

Dugan-MY16 User Guide
38
Typical Operation
This section creates a setup that will work for most applications.
1. Activate the auto mode buttons for all live mic channels.
The figure below shows channels 1–4 in auto mode.
2. Activate the mute buttons for all unused channels.
The figure below shows channels 5–8 in mute mode.
Figure 3-12 Typical operation
3. Activate the preset button next to the active mode button on each channel.
This causes that mode to be selected when the system restarts.
4. Initially, set the mixer’s faders to unity gain.
5. Speak into each mic normally at the desired distance from the mic. Increase the mix-
er’s input gain to just below clipping for best automatic mixing performance.
The input gain to the Dugan-MY16 should be high enough keep the level LED lit
green during silences.
If the input gain controls are set too low, the inputs drop below the minimum op-
erating level, and the smooth ambience is disrupted.