manual

ManualsBrandsYamaha ManualsAudio MixerQL5

161

162

163

164

165

166

167

168

169

170

I/O devices and external head amps

V5 Reference Manual

167

5 REMOTE ONLY button

This button is displayed for I/O devices that can be operated on the device itself.

Set this button to ON to disable panel operation of the I/O device unit, making only

remote controls available. The operation (selecting ON or OFF) of the REMOTE ONLY

button is available only from a console the WITH RECALL button set to ON in the

REMOTE HA SELECT screen.

6 REMOTE CONTROL STATUS indicator

Appears in all remote control supported devices and displays the settings of the remote

control.

7 OUTPUT PATCH button

Appears when selecting a device (for I/O DEVICE) having a large number of channels.

Touch to open the OUTPUT PATCH window.

 HA display

This shows the HA settings of the I/O device. Press this area to open the I/O DEVICE HA

window, in which you can make detailed head amp settings.

If you press the [SEL] key of an input channel, the corresponding port will light. (It does not

light for external QL series consoles.)

8 Analog GAIN knob

Indicates the analog gain setting. This screen is only for display; the value cannot be

edited.

9 +48V indicator

Indicates the phantom power (+48V) on/off status for each port.

0 OVER indicator

Warns you when the input signal is clipping.

A HPF indicator

Indicates the high-pass filter on or off status for each port.

 INPUT display

This shows the input settings of I/O devices not assigned to REMOTE HA ASSIGN.

If you press the [SEL] key of an input channel, the corresponding port will light. (It does not

light for external QL series consoles.)

 OUTPUT display

This shows the output settings of the I/O device. Press here to access the OUTPUT PATCH

window, where you can make output port settings for the I/O device.

If you press the [SEL] key of an output channel, the corresponding port will light. (It does not

light for external QL series consoles.)

 RMio64-D display

Displays the RMio64-D panel. You can press the buttons to change settings.

1 MADI SRC ON indicator

MADI SRC ON button

Switches the SRC (Sampling Rate Converter) on and off.

5421 3