manual

Setup
V5 Reference Manual
228
4 MAKE DIR button
Creates a new directory.
5 PATH
Indicates the name of the current directory. Press the arrow button to move to the next
higher level. If the current directory is the top level, the arrow button is dimmed.
6 VOLUME NAME/FREE SIZE
Indicates the volume name and the amount of free space on the USB flash drive. If the
USB flash drive is write-protected, a protect symbol will appear in the VOLUME NAME
field.
7 File list
This area lists the files and sub-directories that are saved on the USB flash drive. The
highlighted line indicates the file selected for operations.
The file list contains the following items. When you press an item name, it will turn
orange, and the list will be sorted by that item. Each time you press the item name, the
sorting order will alternate between ascending and descending order.
• FILE NAME.......... Indicates the file name or directory name, and shows an icon
indicating its type.
• COMMENT........... The comment added to the QL console setting file is displayed
here. You can press this area to open a keyboard window, allowing
you to enter a comment for the file.
• READ ONLY ........ A lock symbol in this column indicates that the corresponding file
is protected. You can press this area to enable or disable the
protect setting.
Protected files cannot be overwritten.
• TYPE.................... Indicates the file type.
ALL: File containing QL internal settings
KEY: User authentication key
XML: Help file
BMP: Bitmap image file
MP3: MP3 file
[DIR]: Directory
NOTE
• If the file format version is earlier than V1.70, “old” is displayed in the
second line of this field. Data can be loaded even if “old” is displayed.
• If the console version is V2 or later, data from any version can be
loaded.
• TIME STAMP ....... Indicates the date and time at which the file was modified most
recently.
8 File selection knob
Selects a file on the file list. You can operate this knob using the [TOUCH AND TURN]
knob.
9 SAVE button
Saves all of the QL console internal settings together (page 228).
0 LOAD button
Loads the selected QL setting file (page 230).
A CREATE USER KEY button
Creates a user authentication key (page 207).
B FORMAT button
Initializes the USB flash drive.
If an overcurrent condition occurred at the USB port, this button will become a USB
REMOUNT button. Press this button to remount a USB flash drive (page 233).
C WITH DANTE SETUP AND I/O DEVICE button
If this is off, the DANTE SETUP and I/O device settings as well as word clock settings will
be omitted when a settings file is loaded.
NOTE
The DANTE SETUP settings SECONDARY PORT and CONSOLE ID will not be changed even
if the WITH DANTE SETUP AND I/O DEVICE button is on.
Saving the QL console’s internal data on a USB flash drive
All of the QL series console’s internal data can be saved on a USB flash drive as a setting file.
The saved file will have an extension of “.CLF.”
STEP
1. In the SAVE/LOAD window, press the SAVE button.
2. In the SAVE SELECT screen, select the data to be saved, the data type, and the save
destination.
3. In the SAVE SELECT screen, press the SAVE button.
4. Enter a file name and comment.
5. Press the SAVE button to execute the Save operation.