manual

Input and output patching

V5 Reference Manual

PORT SELECT window

Displayed when you press the DIRECT OUT PATCH button in the one-channel or the eight-

channel INSERT/DIRECT OUT window. Set the output port used for direct output.

1 Category select list

Selects the category of output port. The categories correspond to the following output

ports. The displayed categories vary depending on the channel type.

• OUTPUT/DIGITAL/REC.........OMNI OUT1–OMNI OUT16 (QL5), OMNI OUT1–OMNI

OUT8 (QL1), DIGITAL OUT L/R, RECORDER IN(L/R)

• SLOT1....................................SLOT1(1)–SLOT1(16)

• SLOT2....................................SLOT2(1)–SLOT2(16)

• DANTE1–32...........................DANTE1–DANTE32

• DANTE33–64.........................DANTE33–DANTE64 (QL5 only)

2 Output port select buttons

Assign the output port used for direct output of the currently-selected INPUT channel.

3 CLOSE button

Closes the window.